Blue White Zinc Plated Carriage Bolt DIN603

Blue white zinc plated carriage bolt DIN603 with round head and square neck
Black oxide carriage bolt, round head square neck bolt DIN603, carbon steel fastener
Yellow zinc plated carriage bolt DIN603, round head square neck bolt with brass golden iridescent finish, carbon steel fastener

Blue white zinc plated carriage bolts to DIN603 are heavy duty fasteners with a rounded head and a square neck that bites into timber, stopping the bolt from turning while you tighten the nut from the other side. We manufacture these carriage bolts in grade 4.8, 8.8 and 10.9 carbon steel, and in SS304 and SS316 stainless steel, with blue white trivalent zinc plating as the standard finish for a bright, uniform look and reliable indoor protection.

Key Features of Blue White Zinc Plated Carriage Bolt DIN603

A DIN603 carriage bolt, also called a coach bolt, has a smooth dome head, a short square neck under the head and a threaded shank. The square neck locks into a pre drilled hole in wood, so the bolt stays fixed and you only need one wrench on the nut. This design speeds up timber assembly and gives a clean, snag free surface on the finished side.

The blue white trivalent zinc plating adds a bright silver blue finish with good corrosion resistance for indoor and sheltered outdoor use. The coating is free from hexavalent chromium and meets current environmental rules in Europe and North America, which matters for importers who need to pass customs and buyer audits.

Materials and Strength Grades

We produce the blue white zinc plated carriage bolt DIN603 in four material families:

  • Q235B carbon steel, grade 4.8, for general timber and fencing work
  • 35# or 35K steel, grade 8.8, for higher clamping force in racking and guardrails
  • 45# steel and 20MnTiB alloy steel, grade 10.9, for heavy structural connections
  • SS304 (A2-70) and SS316 (A4-70) stainless steel for food plants, coastal sites and chemical areas

Grade 10.9 carriage bolts use 20MnTiB alloy steel for better hardenability and toughness, so they hold torque without cracking in high load joints. Stainless steel versions never need plating, so they keep a clean surface in wet rooms, greenhouses and wash down areas.

Surface Treatment Options

Beyond blue white trivalent zinc plating, we offer several finishes so the carriage bolt matches your project environment:

  • Blue white trivalent zinc plating (BZP): bright, economical, good for indoor use
  • Color zinc plated: yellow or blue iridescent finish with slightly better salt spray life
  • Hot dip galvanizing (HDG): thick zinc layer for outdoor, coastal and construction sites
  • Oxidized black: matte dark finish for decorative and machinery applications
  • Dacromet: zinc aluminium flake coating with strong corrosion resistance and no hydrogen embrittlement risk for grade 10.9 bolts

For outdoor timber structures and guardrails, hot dip galvanized carriage bolts to DIN603 give the longest service life. For grade 10.9 bolts in humid conditions, Dacromet is the safer choice because it avoids acid pickling during plating and protects the high strength core from hydrogen damage.

Dimensions and Thread Options

Metric sizes follow DIN603. We keep regular stock of M6, M8, M10, M12, M14, M16, M20 and M24. The full range covers M5 to M48, and we produce the less common sizes on request when stock runs short. Standard lengths run from 12 mm to 300 mm, and we cut longer carriage bolts to your drawing if your project needs them.

Most stock carries coarse thread, with fine thread available in limited quantities. You can order full thread bolts for metal to metal clamping, or half thread bolts for timber joints where the unthreaded shank carries the shear load and protects the wood from thread damage.

Imperial carriage bolts follow ASME and ASTM practice. We supply 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch, 1 inch and 2 inch diameters, with lengths and thread lengths matched to your specification.

Standards We Follow

Every batch meets one or more of the following standards:

  • GB/T12 small round head square neck carriage bolts
  • GB/T14 big half round head square neck carriage bolts
  • DIN603
  • ASME B18.2.1 and ASTM A307
  • ISO 898-1 mechanical properties

We supply test reports for tensile strength, hardness, zinc coating thickness and salt spray on request, so your engineer can verify the bolts against the project specification before shipment. Head marking, thread tolerance and coating thickness all follow the standard you order against.

Common Applications of Carriage Bolts

The blue white zinc plated carriage bolt DIN603 works well in timber construction, guardrails, greenhouses, racking systems and light steel structures. Timber decking, fence posts, wooden pallets, garden sheds and modular buildings all rely on the square neck design to prevent rotation and to leave a smooth head on the visible side.

Guardrails and highway barriers use hot dip galvanized carriage bolts for weather resistance, while greenhouse frames and racking prefer blue white zinc plated or color zinc versions. Stainless steel carriage bolts suit food processing lines, cold storage and coastal projects where rust stains cannot be accepted.

Custom Service and Why Buy From Us

We hold enough stock of M6 to M24 to ship trial orders quickly, and we accept OEM and ODM orders with custom head markings, packing and labels. Our team checks dimensions, thread and coating on every lot before loading, and we can arrange third party inspection if your buyer requires it.

Send us your size list and standard, and we will confirm stock and quote within 24 hours.

For more fastening products, browse our full fastener catalog or check our blue white zinc plated eyelet bolt type B. You can also read more about the carriage bolt design on Wikipedia.

发表评论

您的邮箱地址不会被公开。 必填项已用 * 标注

滚动至顶部