Swivel Coupler for Scaffolding – 48.3mm Galvanized Swivel Scaffold Coupler

48.3mm galvanized swivel scaffold coupler, drop forged steel, hot-dip galvanized

A 48.3mm galvanized swivel scaffold coupler is a drop forged or pressed tube fitting that joins two 48.3mm scaffold tubes at any angle in a tube-and-coupler scaffolding frame. We supply this galvanized swivel scaffold coupler in Q235/Q345 carbon steel, forged steel, 45# steel or SS304 stainless steel, finished by hot-dip galvanizing, electric zinc plating, spray painting or brushed natural finish. It works together with right-angle couplers to lock diagonal braces, cross braces and tie-in nodes on working scaffolds, falsework and temporary access structures.

What Is a 48.3mm Galvanized Swivel Scaffold Coupler

The swivel scaffold coupler differs from a right-angle coupler in that its two clamps rotate around a central rivet, so the two connected tubes can sit at any angle rather than a fixed 90 degrees. This makes the 48.3mm galvanized swivel scaffold coupler the standard choice for diagonal bracing, where braces meet ledgers and standards at an oblique angle. The coupler body wraps around the tube, and the bolt and wedge tighten to a specified torque so the clamped tube cannot slip under design load.

Materials and Surface Treatments

We produce the swivel coupler from several material options to match the project environment and budget:

  • Q235 or Q345 carbon steel, the most common choice for general scaffolding
  • Drop forged steel and 45# steel for higher strength heavy-duty couplers
  • SS304 stainless steel for coastal, chemical, food processing and corrosive environments

Surface treatment options include hot-dip galvanizing for long outdoor corrosion resistance, electric zinc plating and spray painting for lighter-duty or short-term use, and a natural or brushed finish for stainless steel couplers. The galvanized finish forms a zinc layer that protects the steel from rust during the whole rental and construction cycle.

Six Standard Types and Specifications

Our 48.3mm galvanized swivel scaffold coupler covers six common types:

  1. Standard Drop Forged
  • Tube: Φ48.3mm; Weight: about 1.4–1.6kg
  • Process: drop forged; Finish: hot-dip galvanizing
  • Standards: EN 74-1 Class B, BS 1139
  • Markets: Europe, Middle East, Southeast Asia, Africa
  1. Pressed
  • Tube: Φ48.3mm; Weight: about 1.0–1.2kg
  • Process: pressed; Finish: electric zinc plating or spray painting
  • Standards: BS 1139 system, per factory certificate
  • Markets: Southeast Asia, Africa, South America
  1. Heavy Duty
  • Tube: Φ48.3mm, compatible with 60.3mm; Weight: about 1.7–2.0kg
  • Process: drop forged; Finish: hot-dip galvanizing
  • Standards: EN 74-1 Class A or B
  • Markets: large-scale projects in the Middle East and Europe
  1. British Type
  • Tube: Φ48.3mm; Weight: about 1.4–1.6kg
  • Process: drop forged; Finish: hot-dip galvanizing
  • Standards: BS 1139-2.2:2009+A1:2015
  • Markets: the United Kingdom, Commonwealth countries, Middle East
  1. German Type
  • Tube: Φ48.3mm; Weight: about 1.4–1.6kg
  • Process: drop forged; Finish: hot-dip galvanizing
  • Standards: EN 74-1:2022
  • Markets: Germany, Europe, Middle East
  1. SS304 Stainless Steel
  • Tube: Φ48.3mm; Weight: about 1.4–1.6kg
  • Process: forging or precision casting; Finish: natural color or brushed
  • Standards: EN 74 system, per factory certificate
  • Markets: high-end European and American projects, chemical, food and coastal sites

How Swivel Couplers Connect Scaffold Tubes

Swivel couplers connect two scaffold tubes at any angle, typically for diagonal braces, cross braces and tie-in nodes. In a tube-and-coupler scaffold, right-angle couplers hold the vertical standards and horizontal ledgers at 90 degrees, while swivel couplers add the diagonal braces that resist lateral sway and keep the whole frame rigid. Properly tightened swivel couplers transfer brace forces back into the standards and ledgers, preventing the scaffold from racking under wind, worker load or material handling.

For more background on how these fittings fit into a tube-and-coupler system, see the scaffolding guide.

Standards and Main Markets

The two standards buyers specify most often are EN 74-1 for European couplers and BS 1139 for British system couplers. EN 74-1 classes couplers by load and distortion limits, with Class A for structural duty and Class B for general duty. British Type couplers follow BS 1139-2.2, while German Type couplers follow the latest EN 74-1:2022 edition. Heavy-duty couplers with the higher 1.7–2.0kg body suit large projects in the Middle East and Europe, and stainless SS304 couplers serve corrosive coastal or process-industry sites.

Custom Service and Why Buy From Us

Besides the standard Φ48.3mm range, we can supply swivel couplers for Φ42.4mm, Φ48.3mm and Φ60.3mm tubes, and we adjust material, finish, weight and marking to your drawing. We hold regular stock of drop forged galvanized couplers for trial orders, and we accept OEM orders with your brand marking and packing.

Send us your scaffold standard or project drawing, and our engineers will confirm the coupler type, class and quote within 24 hours.

Browse our full fastener and scaffolding range, or check our blue white zinc plated eyelet bolt type B and carriage bolt DIN603 products for other steel construction fittings.

Please browse our full fastener and scaffolding range.

Please browse our blue white zinc plated eyelet bolt type B

发表评论

您的邮箱地址不会被公开。 必填项已用 * 标注

滚动至顶部