



The large American type hose clamp is a wide-band worm-gear clamp with a 12.7mm wide band, supplied in 201/304 stainless steel or white zinc plated carbon steel for large rubber hose joints. This American type hose clamp is built for larger hose diameters and general heavy connections where a firm, even band and a durable fastening are required. It covers wide hose diameter ranges from 16mm up to 290mm, with custom specifications available on request.
What Is a Large American Type Hose Clamp
The large American type hose clamp belongs to the American-type worm-gear clamp family, sized for larger hose assemblies and broad-bore connections. A slotted steel band wraps around the hose, and a worm screw and nut in the housing engage the band slots; turning the screw reduces the band diameter and pulls the clamp tight against the fitting. The open slots allow repeated adjustment across the marked size range.
As a large-size clamp, it uses a 12.7mm wide band to spread clamping force over a broad contact area. The clamp sits over the hose where it meets the fitting, compressing the rubber onto the barb or nipple to prevent fluid or gas leakage and keep the hose secured under vibration and working load.
Material Options and 12.7mm Band
Material and band details:
- Band width: 12.7mm
- Material: 201 stainless steel, 304 stainless steel, or white zinc plated carbon steel
- Type: American-type worm-gear hose clamp
The 201 stainless steel option provides a lower-cost choice for less demanding general connections, the 304 stainless steel option offers basic rust and oxidation resistance for humid and mild general-purpose use, and the white zinc plated carbon steel option provides a cost-effective steel body for dry and low-corrosion conditions. For background on American-type clamp selection by band width and material, see this American-type hose clamp selection and installation guide.
Sizes, Nut Grades and Packing
This American type hose clamp is produced across a wide range of hose diameters, with the worm nut graded to match the clamp size. The nut grades available in the specification range include M4, M5, M6, M8, M10, M12 and M14, and the packing quantity per carton decreases as the clamp size and diameter range increase.
Representative size groups include:
- M4: 16–25mm and 19–29mm
- M5: 22–32mm, 25–38mm, 32–44mm
- M6: 35–51mm, 38–57mm, 44–64mm, 51–70mm
- M8: 64–76mm, 70–89mm, 76–92mm, 80–100mm
- M10: 90–110mm up to 270–290mm
- M12 and M14: larger diameter ranges for the broadest hose sizes
When selecting a clamp, measure the hose outer diameter and choose a range that places the hose near the middle of the adjustment band, rather than at the minimum or maximum limit, so the band has room to tighten evenly without over-expanding. Send your required diameter and nut grade to confirm the exact packing quantity for that size.
Typical Applications
This American type hose clamp is mainly applied to oil, gas and liquid rubber hose joints on:
- Automobiles and tractors
- Vessels and marine piping
- Gasoline engines and diesel engines
- Irrigation sprinklers
- Water supply and drainage pipe joints in buildings
It serves as a fastening element for rubber hose connections in general equipment and plumbing work. Related fasteners in our range include the carriage bolt DIN 603, a round-head bolt for general fastening, and the flat washer, which distributes bearing pressure under bolted joints.
Custom Service
During installation, the American type hose clamp should be slid onto the hose before the hose is pushed onto the fitting, then positioned over the barb or nipple and tightened gradually. The band should sit flat and centered around the hose, with the worm housing kept clear of wear-prone edges. After tightening, check that the joint is snug and the hose has not bulged or distorted.
We can customize other specification hose clamps if you have a different requirement. Send us the hose outer diameter, band width, material grade, nut grade, quantity and application, and our team will confirm the clamp size, packing and material for your large hose connection project.
Browse our full fastener and seal range, including bolts, nuts, washers, hose clamps, O-rings and hydraulic seals for construction, machinery, automotive, marine and industrial assembly.