



The heavy duty american type hose clamp is a wide-band worm-gear clamp with a 14mm wide band and 0.65mm thickness, made from SS304 stainless steel for demanding rubber hose connections. This heavy duty american type hose clamp is built for heavy-duty equipment and industrial piping where a firm, even clamp and durable corrosion-resistant band are required. It covers a wide range of hose diameters from 13mm to 311mm, with custom specifications available on request.
What Is a Heavy Duty American Type Hose Clamp
The heavy duty american type hose clamp belongs to the American-type worm-gear clamp family, sized for heavier equipment and larger hose assemblies. A slotted stainless band wraps around the hose, and a worm screw in the housing engages the band slots; turning the screw reduces the band diameter and pulls the clamp tight against the fitting. The open slots allow repeated adjustment across the marked size range.
Compared with a standard small-size clamp, this heavy duty version uses a wider 14mm band to spread clamping force over a broader contact area, suited to high-vibration and heavy-duty connections. The clamp sits over the hose where it meets the fitting, compressing the rubber onto the barb or nipple to prevent leakage and keep the hose secured under working load.
Material and Band: SS304, 14mm Band, 0.65mm Thickness
Material and band details:
- Band width: 14mm
- Band thickness: 0.65mm
- Material: SS304 stainless steel
- Type: American-type worm-gear hose clamp
The SS304 stainless steel band provides basic rust and oxidation resistance for general industrial, outdoor and marine-adjacent connections. The wider band and 0.65mm thickness give the clamp a firm body for heavy-duty service, while the worm drive allows controlled tightening around the hose. For background on American-type clamp selection by band width and material, see this American-type hose clamp selection and installation guide.
Sizes and Adjustment Ranges
This heavy duty american type hose clamp is supplied in the following adjustment ranges, measured in millimeters:
- 13–23, 14–27, 18–32, 21–24, 27–51, 33–57, 40–63
- 46–70, 52–76, 59–82, 65–89, 72–95, 78–101, 84–108
- 91–114, 105–127, 118–140, 130–152, 141–165, 155–178, 175–197
- 194–216, 213–235, 232–254, 251–273, 270–292, 289–311
When selecting a clamp, measure the hose outer diameter and choose a range that places the hose near the middle of the adjustment band, rather than at the minimum or maximum limit, so the band has room to tighten evenly without over-expanding.
Typical Applications
This heavy duty american type hose clamp is mainly applied to heavy-duty equipment and industrial piping:
- Heavy duty trucks
- Construction machinery
- Agricultural machinery
- Generator sets
- Marine equipment
- Mining equipment
- Industrial piping
It serves as a fastening element for rubber hose connections under load and vibration. Related fasteners in our range include the carriage bolt DIN 603, a round-head bolt for general fastening, and the flat washer, which distributes bearing pressure under bolted joints.
Custom Service
During installation, the heavy duty american type hose clamp should be slid onto the hose before the hose is pushed onto the fitting, then positioned over the barb or nipple and tightened gradually. The band should sit flat and centered around the hose, with the worm housing kept clear of wear-prone edges. After tightening, check that the joint is snug and the hose has not bulged or distorted; recheck the connection after the first working cycle where vibration or heat expansion may settle the assembly.
We can customize other specification hose clamps if you have a different requirement. Send us the hose outer diameter, band width, band thickness, material grade, quantity and application, and our team will confirm the clamp size, packing and material for your heavy-duty hose connection project.
Browse our full fastener and seal range, including bolts, nuts, washers, hose clamps, O-rings and hydraulic seals for construction, machinery, automotive, marine and industrial assembly.