G80 Eye Sling Hook with Safety Latch

g80 eye sling hook with safety latch alloy steel lifting hook for chain wire rope and webbing slings

A G80 eye sling hook with safety latch is a forged lifting hook fitted with a spring-loaded latch across the hook mouth, used to connect chain slings, wire rope slings or webbing slings in lifting and rigging operations. This g80 eye sling hook is available in alloy steel 42CrMo or 20Mn2, with carbon steel and stainless steel options, and its working load limit ranges from 0.5T to 15T depending on the size. Powder coating, hot dip galvanized, electro galvanized and black oxide finishes are offered to suit lifting, rigging, towing, marine and construction service.

What Is a G80 Eye Sling Hook

An eye sling hook is a general-purpose lifting hook with a closed forged eye at the top, which links to a coupler link, master link, chain sling or rope sling. The hook body carries the load through its curved throat, while the eye provides a secure pivot connection that allows the sling to settle under tension. The “G80” designation refers to an 80-grade alloy steel rating, a common industrial grade for quenched and tempered lifting components that balances high strength, impact resistance and reliable fatigue performance.

Compared with a clevis hook that bolts through the ear, an eye hook connects through the top eye, making it a compact choice for sling assemblies where a welded or forged eye connection is preferred. For guidance on comparing eye, clevis and swivel hooks, see this lifting hook selection and working load limit guide.

Materials and Construction

The standard g80 eye sling hook is forged from alloy steel grades such as 42CrMo or 20Mn2, then quenched and tempered to reach the Grade 80 strength level. The alloy construction delivers the tensile strength and toughness required for repeated lifting cycles under dynamic load. On request, carbon steel and stainless steel versions can be supplied for lower-duty or corrosion-sensitive environments.

The eye is forged as part of the hook body so that the load path runs continuously from eye to throat. After forging and heat treatment, the body is inspected for surface defects before finishing, and the finished hook is marked with its working load limit, grade and trace details where required.

Safety Latch Design

The safety latch is a spring-loaded metal catch that closes over the hook mouth and presses against the hook point. Its purpose is to keep the sling, chain or connector from slipping out of the throat while the load is raised, moved or lowered, and to prevent accidental disengagement during transit. The latch remains positively closed under normal working conditions and opens only when the sling is deliberately placed into or removed from the hook.

The latch is a safety component and should not be removed or disabled during service. If the latch is bent, cracked, stiff or fails to close, the hook should be retired or fitted with a manufacturer-approved replacement latch; a lifting hook should not be operated without a functioning latch.

Working Load Limit and Sizes

The working load limit (WLL) is the maximum load the hook is certified to carry in normal service. This g80 eye sling hook is offered in the following WLL sizes:

  • 0.5T, 1T, 2T, 3.2T, 5T, 8T, 12.5T, 15T

Each size matches a hook body dimension, eye opening and throat capacity for its rated load. The breaking load of a Grade 80 rigging hook is typically four times its WLL, which gives the standard safety margin used in lifting equipment. In practice, always read the WLL stamped on the hook body itself, and derate the sling assembly for sling angle, multi-leg configuration and the condition of the matched components.

Surface Finishes

Several surface finishes are available to protect the hook and match the working environment:

  • Powder coating: a durable colored coating, commonly red, that resists chips and covers the forged body
  • Hot dip galvanized: thick zinc coating for outdoor and corrosion-prone service
  • Electro galvanized: thinner zinc finish for lighter-duty and indoor use
  • Black oxide: dark protective finish for a plain dark appearance

The finish does not change the rated WLL; it protects the underlying material from rust and surface wear. For marine or coastal exposure, galvanized or stainless versions are usually preferred over plain powder-coated bodies.

Applications and Custom Supply

This eye sling hook is used across lifting, rigging, towing, marine and construction applications. Typical setups include crane and hoist sling assemblies, chain sling fittings, wire rope sling connectors, webbing sling hooks, towing rigs, dock and marine hardware, and structural construction rigging.

We supply g80 eye sling hooks by WLL size, material and finish, and can match them with other rigging components for a complete sling assembly. Custom marking and packing are available on request, and samples can be arranged before bulk orders.

Browse our related rigging and fastener hardware, including turnbuckles for tensioning and eye bolts for fixed lifting points. Send your required WLL, material and finish for a hook quotation.

发表评论

您的邮箱地址不会被公开。 必填项已用 * 标注

滚动至顶部