Small American Type Hose Clamp

small American type hose clamp 8mm band 201 304 stainless steel worm gear clamp for rubber hose auto tractor vessel engine irrigation

The small american type hose clamp is a worm-gear band clamp with an 8mm wide band, made from 201 or 304 stainless steel for fastening rubber hose joints. This small american type hose clamp adjusts around the hose fitting and tightens evenly to hold the hose securely on oil, gas and liquid connections. It covers small to medium hose diameters from 8mm to 38mm and can be custom made to other specifications on request.

What Is a Small American Type Hose Clamp

The small american type hose clamp belongs to the American-type worm-gear clamp family. A slotted steel band wraps around the hose, and a worm screw in the housing engages the band slots; turning the screw reduces the band diameter and pulls the clamp tight against the hose. The open slots allow repeated adjustment, so the same clamp can cover a range of hose outer diameters within its marked size range.

As a small-size clamp, it uses an 8mm wide band suited to finer hose connections and compact assemblies. The clamp sits over the hose where it meets the fitting, compressing the rubber onto the barb or nipple to prevent fluid or gas leakage and keep the hose from slipping off under vibration or pressure.

Material and Band: 201/304 Stainless Steel, 8mm Band

Material and band details:

  • Band width: 8mm
  • Material: 201 stainless steel or 304 stainless steel
  • Type: American-type worm-gear hose clamp

The 201 stainless steel option provides a lower-cost choice for less demanding dry and general connections, while the 304 stainless steel option offers basic rust and oxidation resistance for humid and mild general-purpose use. Stainless steel construction keeps the clamp suitable for plumbing, engine and equipment hose connections where corrosion resistance is needed. When the small american type hose clamp is installed, the band should sit flat around the hose and the worm screw tightened gradually so the joint stays snug without distorting the hose. For background on American-type clamp selection by band width and material, see this American-type hose clamp selection and installation guide.

Sizes and Packing

The small american type hose clamp is supplied in the following adjustment ranges, packed 100 pieces per bag and 5000 pieces per carton:

  • 8–12mm: 100 pcs/bag, 5000 pcs/carton
  • 10–16mm: 100 pcs/bag, 5000 pcs/carton
  • 13–19mm: 100 pcs/bag, 5000 pcs/carton
  • 16–25mm: 100 pcs/bag, 5000 pcs/carton
  • 19–29mm: 100 pcs/bag, 5000 pcs/carton
  • 22–32mm: 100 pcs/bag, 5000 pcs/carton
  • 25–38mm: 100 pcs/bag, 5000 pcs/carton

When selecting a clamp, measure the hose outer diameter and choose a range that places the hose near the middle of the adjustment band, rather than at the minimum or maximum limit, so the band has room to tighten evenly without over-expanding.

Typical Applications

This small american type hose clamp is mainly applied to oil, gas and liquid rubber hose joints on:

  • Automobiles and tractors
  • Vessels and marine piping
  • Gasoline engines and diesel engines
  • Irrigation sprinklers
  • Water supply and drainage pipe joints in buildings

It serves as a fastening element for rubber hose connections in general equipment and plumbing work. Related fasteners in our range include the carriage bolt DIN 603, a round-head bolt for general fastening, and the flat washer, which distributes bearing pressure under bolted joints.

Custom Service

We can customize other specification hose clamps if you have a different requirement. Send us the hose outer diameter, band width, material grade, quantity and application, and our team will confirm the clamp size, packing and material for your hose connection project.

Browse our full fastener and seal range, including bolts, nuts, washers, hose clamps, O-rings and hydraulic seals for construction, machinery, automotive and industrial assembly.

发表评论

您的邮箱地址不会被公开。 必填项已用 * 标注

滚动至顶部