Galvanized Drop Forged Scaffold Right Angle Coupler 48.3mm

galvanized drop forged scaffold right angle coupler 48.3mm with T bolt and butterfly nut

A scaffold right angle coupler connects two scaffold tubes at a fixed 90 degrees to lock a vertical standard to a horizontal ledger in a tube-and-coupler scaffolding frame. We supply this galvanized drop forged scaffold right angle coupler in Q235/Q235B carbon steel, Q345/Q355 low alloy high strength steel, high quality carbon steel, cast steel, ductile iron or SS304/316 stainless steel, with bolt and butterfly nut matched to the working standard. It provides a rigid, secure and fully reusable joint that crews install and dismantle quickly with a wrench.

What Is a Scaffold Right Angle Coupler

The right angle coupler is the most widely used fitting in a tube-and-coupler scaffold. Unlike a swivel coupler that rotates to any angle, this scaffold right angle coupler holds its two clamps at a permanent 90-degree position, so standards and ledgers stay square under worker load, material weight and wind. The coupler body wraps both tubes, and the T bolt and butterfly nut tighten to the specified torque, clamping the faying surfaces together so the tubes cannot slip or rotate in service.

Materials and Surface Treatments

We produce the right angle coupler from several material options for different load levels and environments:

  • Q235/Q235B carbon steel, the general-purpose choice for common scaffolding
  • Q345/Q355 low alloy high strength steel for heavier duty structures
  • High quality carbon steel, cast steel and ductile iron for pressed, cast and iron-body couplers
  • SS304/316 stainless steel for coastal, chemical and corrosive sites

Surface treatment options cover hot-dip galvanizing for long outdoor corrosion resistance, electro galvanizing, gold or yellow zinc plating, powder coating or painted finish, self-colored natural finish, and Dacromet coating for high corrosion resistance.

Bolt and Nut Configuration

Each scaffold right angle coupler is fitted with a matched bolt and nut set. The common bolt options are:

  • M10, grade 5.8
  • M12, grade 5.8 or 8.8, GB
  • M14, grade 8.8, British standard
  • 1/2″ BSW, British standard, T type bolt

The T type bolt can be supplied together with a butterfly nut, which speeds up hand tightening and removal on site. Bolt grade and thread standard are selected to match the coupler body and the project specification.

Tube Diameters by Market and Standard

Our right angle coupler covers the main tube diameters used in different markets:

  • 42.4mm (1.66″): old British standard
  • 48.3mm (1.9″): BS 1139, EN 74, GB 15831
  • 48mm / 48.6mm: GB 15831 / NF, interchangeable with 48.3mm
  • 51mm: D51, Germany market
  • 60.3mm (2.375″): American type, heavy duty, USA and Canada market
  • 76mm: D76, heavy duty
  • 89mm: American type heavy duty D89, large caliber

Standards and Forming Processes

The couplers are manufactured to the standards buyers specify by region: GB/T 15831-2023 for the Chinese market, BS 1139 for British system, EN 74 for Europe, AS/NZS 1576 for Australia and New Zealand, and OSHA 1926.451 for United States scaffolding requirements.

Forming processes include casting, forging, pressing and stamping. Drop forged bodies give the highest strength and fatigue resistance for heavy duty and main structures; cast, pressed and stamped bodies offer economical options for lighter-duty and standard-duty use.

Applications and Reusability

The scaffold right angle coupler joins a vertical standard to a horizontal ledger to build the framework of a scaffold, support tower or working platform. Together with swivel couplers that add diagonal bracing, it forms the rigid tubular frame that carries workers, planks and materials. Because the joint opens and closes with a wrench, the coupler can be reused across many projects with no permanent deformation when tightened within the specified torque range.

For more background on how these fittings fit into a tube-and-coupler system, see the scaffolding guide.

Custom Service and Why Buy From Us

We supply couplers from 42.4mm up to large caliber 89mm, and we adjust material, bolt grade, finish and body process to your drawing or standard. We hold regular stock of 48.3mm galvanized right angle couplers for trial orders, and we accept OEM orders with your brand marking and packing.

Send us your scaffold standard or project drawing, and our engineers will confirm the coupler type, bolt set and quote within 24 hours.

Browse our full scaffolding range, including the swivel scaffold coupler for diagonal bracing, or check our fastener products such as the eyelet bolt type B and carriage bolt DIN603.

by the way, Please browse our eyelet bolt type B.

发表评论

您的邮箱地址不会被公开。 必填项已用 * 标注

滚动至顶部