


The NBR O-Ring is a round-section elastomer seal made from nitrile butadiene rubber, supplied here as a 50mm inner diameter by 3.5mm cross section black O-ring. This NBR O-Ring is specified at 70±5 Shore A hardness for hydraulic, pneumatic, pipe and flange sealing where resistance to mineral oils and general fluids is required. It follows AS568 and ISO 3601 dimensional standards, with custom sizes and alternative materials available on request.
What Is an NBR O-Ring
An NBR O-Ring is a circular rubber ring with a round cross section, seated in a groove and compressed between two assembled parts to form a seal. When installed, the ring is squeezed in the gland so its elastomer body fills the clearance and blocks fluid or gas passage. NBR, short for nitrile butadiene rubber, is a widely used general-purpose seal material chosen for its oil resistance and cost-effective performance in mineral oil and air service.
The O-ring works in both static and dynamic sealing. In a static joint, it seals between fixed mating faces such as flanges and housings. In dynamic service, it rides against a moving part such as a cylinder piston or rod, retaining fluid while allowing controlled motion. Its simple ring shape and broad size range make it one of the most common sealing elements across industrial equipment. For general mineral oil and air service, the NBR O-Ring provides reliable sealing at a competitive cost.
Material: NBR 70±5 Shore A, Black
Material details for this NBR O-Ring:
- Rubber: NBR (nitrile butadiene rubber)
- Hardness: 70±5 Shore A
- Color: black
- Temperature range: -40°C to +120°C
- Standard: AS568 / ISO 3601, custom sizes available
The 70±5 Shore A hardness balances conformity to the groove and sealing force with enough firmness for general hydraulic and pneumatic service. The black color is the standard finish for NBR industrial O-rings. For background on NBR compound properties and temperature limits, see this NBR nitrile O-ring material and temperature selection guide.
For applications outside the NBR temperature or fluid range, other compounds can be supplied, including FKM, silicone and EPDM, to match heat, chemical or environment requirements. Always verify fluid compatibility before selecting a compound for a specific medium.
Dimensions: ID 50mm x Cross Section 3.5mm
This listing is specified as follows:
- Inner diameter (ID): 50 mm
- Cross section (CS): 3.5 mm
- Standard: AS568 / ISO 3601
The inner diameter is the opening of the ring, and the cross section is the diameter of the round rubber body. When selecting an O-ring, confirm the gland inner diameter, groove width, groove depth and squeeze ratio against the mating parts, so the installed ring has the correct compression without overloading the elastomer.
Typical Applications
This NBR O-Ring is used across a range of general sealing duties:
- Hydraulic and pneumatic systems
- Pipe and flange sealing
- Automotive engines and transmissions
- Pumps, valves and compressors
- General static and dynamic sealing
It forms part of our hydraulic and industrial seal range. Related products include the hydraulic cylinder seal kit, which supplies matched rod and piston sealing elements for cylinder reseal, the hydraulic guide ring, which aligns moving parts and carries side load, and the hydraulic piston rod seal, which retains oil along the moving rod.
MOQ and Custom Service
The minimum order quantity is 1000 pieces per size, negotiable for trial orders.
- Custom sizes and materials available: FKM, silicone, EPDM
- Sample lead time: 3–7 days
- Bulk production lead time: 15–25 days
We supply standard AS568 and ISO 3601 sizes and can produce custom O-ring dimensions and compounds to your drawing or measured sample. Send us the inner diameter, cross section, quantity, working fluid and temperature range, and our team will confirm the NBR compound or alternative material for your sealing application.
Browse our full seal and fastener range, including piston seals, rod seals, wiper seals, back-up rings, gaskets and O-rings for construction, machinery and industrial assembly.